Lambda Calibration Ltd – Tool, Gauge & Meter Calibration Services UK

We are a calibration services laboratory, accredited by UKAS to ISO/IEC 17025:2005. We provide a massive range of tool, gauge and meter calibration services throughout the UK. Our client base is extremely varied, from self employed electricians to multi-national blue chip companies, and our huge range of services, all under one roof means we can offer our customers a genuine “one stop shop”.

Collection and delivery is free in many areas and normal turnaround is 5 working days. You can even have free on-line access to your calibration records and certificates.

We’re easy to deal with and we keep our promises. So whether you’ve got 1 instrument or 10,000. Whether it’s a torque wrench, a pressure gauge, a micrometer or a multi meter calibration you require…

Please give us a call on 0845 241 1533. Or send us an email. We’ll be glad to help.

Customer Service Overview

Simple menu pricing, no hidden extras.
UK mainland collection and delivery.
Fast 5 working day turnaround.
On-site calibration services.

Detailed calibration certificates.
Online access to calibration records (IMS).
Timely re-calibration reminders.

Tool, Gauge & Meter Calibration Services

Below is a very brief overview of the different types of measuring instrument for which we can provide calibration services. Fuller details can be found by clicking on the relevant heading.

Dimensional Gauge Calibration Services

Dial Indicator, Gauge Blocks, Height Gauge, Micrometer, Plug Gauge, Ring Gauge, Rule, Thread Gauge, Sine Bar, Square, Surface Table, Vernier Caliper, etc…

Electrical Calibration Services

Ammeter, Attenuator, Chart Recorder, Counter/Timer, Earth Tester, Flash Tester, Insulation Tester, 16th / 17th Ed Multi-function Tester, Meter Calibration Check Box, Multi Meter, Oscilloscope, PAT Tester, Resistor, RCD Tester, Shunt, Stopwatch, Tacho-meter, etc…

UKAS Meter Calibration v Check Box ... Meter calibration should be carried out periodically by a UKAS accredited calibration laboratory so that the accuracy of the meter under test can be compared with a standard of known accuracy, under repeatable controlled conditions. Proper meter calibration, carried out say, every 12 months, with a UKAS calibration certificate detailing the full measured results will give you confidence that the meter is producing consistent valid results across its full operating range. Comparison with a check box will not deliver the same level of confidence. Check boxes do however have their place. They are very useful for carrying out quick in-service checking of the major functions of a meter between calibrations. Especially useful when you are on-site, if the meter has been dropped or subjected to overload. Proper UKAS meter calibration is however the only way you can be absolutely sure that the measurements made with the meter are accurate and can be relied upon. Would you buy a second hand car without an MOT? Probably not. The risks and dangers are obvious. Similarly, the risks and dangers of relying on electrical measurements made using an un-calibrated meter should be equally obvious. To sum up then, check boxes have their place, but their use should not be considered an acceptable alternative to a proper calibration by a UKAS accredited calibration laboratory.

Pressure & Vacuum Calibration Services

Absolute or Gauge mode calibration up to 4,000bar (60,000psi) ,.. Digital Pressure Indicator, Manometer, Gauge used on Oxygen, Pressure Gauge, Pressure Transducer, Pressure Switch, Vacuum Gauge, etc…

Temperature Calibration Services

Temperature Probes and Thermometers from –35°C to 1200°C, Infra-Red up to 500°C, Dial Thermometer, Digital Thermometer, Dry Block Calibrator, Freezer, Hot Air Gun, Oven, RTD, Liquid in Glass Thermometer, Soldering Iron, Digital Temperature Meter or Controller, Chart Recorder or Logger, Thermocouple, Thermocouple Simulator, etc...